Display and Edit Window

Edisis fornisce una visualizzazione della struttura assegnata per piante e sezioni di telaio nelle finestre "Edit Piante" ed "Edit Telai". Il disegno è riportato in scala con tutti i dettagli richiesti per una completa definizione (indici, quotature, posizione e tipologia dei fili fissi, ...). La finalità è quella di consentire un rapido controllo dei dati inseriti ma anche quella di fornire uno strumento efficiente di input grafico. E' possibile, infatti, dopo aver selezionato l'azione richiesta, inserire, cancellare o modificare i singoli elementi (Pilastri, Travi e Solai) che compongono l'edificio con un semplice click del mouse.

Edisis provides a display of plans and frame sections in the window "Edit Plants" and "Edit Frames. The design is shown in scale with all details required for a complete definition (indexes, dimensioning, location and type of wireless fixed, ...). The aim is to enable a quick check of data entered and also to provide an efficient tool for graphic input. E 'possible, in fact, after selecting the required action, insert, delete or modify individual elements (pillars, beams and floors) that make up the building with a simple click of the mouse.

Edisis supplies a display of plans and sections of the frame in the Edit Plans windows and Edit Frames for the assigned structure. The drawing is shown to scale with all the details required for a complete definition (indexes, preliminary design, position and type of fixed rows, ..). The aim is to enable a quick check of entered data, but also to provide an efficient instrument of graphic input, In fact, it is possible, after having selected the required action, to enter, cancel or modify the individual elements (Pillars, Beams and Slabs) making it up with a simple click of the mouse.

The windows are organised in a similar way. Apart from the area dedicated to display and editing of the drawing, there is a vertical edit instrument bar, which groups the buttons used to select the elements and activate the action desired, and the status bar, describing the operations under way and their outcome.

Both the windows are synchronised with the input grids and the other display windows. Editing an element or, simply, indicating it with the mouse, provides the updating and automatic repositioning of all the other windows in correspondence with the data associated with the selected element. The option, exclusive to Edisis and the other Newsoft codes, provides an effective instrument for easy surfing within the data of the structure.

Edit controlled by Mouse

The edit is activated by the mouse, after having selected the types of element and the action to be effected (creation, cancellation, modification, shifting, etc...)

Upright element: opens the column lines tool bar. Span element: opens the spans tool bar.. Slab-zone element: opens the slab zone tool bar.. Pillar element: opens the pillars tool bar Beam element: opens the beams tool bar. Slab element: opens the slab instruments bar. Activates the synchronism among correlated windows. Shifts the drawing inside the window. Activates the zoom action. Repositions and centers the drawing to the size of the sheet. Passes from "editing" display to "executive drawing" or "layout". Print preview: allows activation of the print preview of the drawing. Increases the character size. Decreases the size of the letters. Background image: activated or deactivated display of the wmf background images

Pareti Strutturali
Il programma consente di definire le pareti assegnando per le stesse uno spessore in corrispondenza della trave che ne costituisce il coronamento. In questo caso il programma provvede in automatico alla definizione di due pilastri di estremità della parete, se non fossero già stati definiti dall'utente. La trave di coronamento può essere completamente inglobata all'interno della parete assegnando a quest'ultima lo stesso spessore già definito per la larghezza della sezione della trave. Questo modo di schematizzare le pareti strutturali presenta diversi vantaggi: innanzitutto risolve in maniera brillante i problemi di incidenza delle travi in direzione ortogonale alla parete, come nel caso della parete "a baionetta", dove le travi ortogonali potranno attestarsi sui due pilastri di estremo. In secondo luogo, i due pilastri di estremo rappresentano le regioni laterali della parete, notoriamente le più delicate, dove è bene avere una armatura più fitta. La schematizzazione di una cassa ascensore, così, risulta molto semplificata in quanto basta disporre generalmente quattro pilastrini agli spigoli e far crescere al loro interno la parete, definendone lo spessore nel foglio "Dati Elementi Travi". Sebbene sia possibile schematizzare la parete come un normale pilastro allungato, si consiglia di sfruttare la descrizione appena indicata, in quanto sicuramente più semplice e affidabile in termini di modellazione strutturale. Il programma infatti non solo genera il pilastro corrispondente alla parete descritta, in modo da definirne il comportamento all'interno del telaio longitudinale in cui essa è compresa, ma ne mette in conto in automatico ed in maniera corretta anche il suo contributo ai telai trasversali che ne contengono gli estremi.

	enter the selected object. Entering is carried out by clicking with the mouse on the drawing area in the position desired; the user can check the position of the node to be entered on the area of the current co-ordinates of the cursor on the status bar.
	cancel the selected object. Click with the mouse on the object to be eliminated; the program checks that it is not necessary for other objects before eliminating it.
	move the selected object. Click with the mouse and, keeping the button depressed, drag the object into its new position and release it.
	modify the characteristics of the selected object. the modify action can be selective, involving only some of the data, assigning similar characteristics; with <CTRL> + click it is possible to capture data from other objects, copying the values.
	dimension the selected object. Click on the object to deactivate and/or modify the preliminary design. Drawing Options

Drawing Options

The drawing options are accessible from suitable popup menus that enable the activation of the drawing Options window that allows assignation of drawing preferences, such as the presence of a heading and element indexes, letter sizes, grid resolution, snapping and dotting. Furthermore, in the square Elements present, the display of particular drawing elements can be activated or deactivated, specific to every kind of drawing. In the case of the plans it is possible, for example, to exclude the slab drawing, activating the drawing of only the counterlath symbol, or the preliminary design or the writing of the BxH sizes of each beam.

Display and Edit of Loads

The display allows for 5 options: just the diagram, editing, executive drawing, permanent loads, live loads. The loads are displayed with a colour code (the stronger shades correspond to heavier loads) so that it is easier to check the input. As with other data defining the structure, the loads can also be assigned and modified by mouse directly in the display window.